Atlas Shaper Restoration

Home Page

About Me

My Workshop

Fenn Lathe

Geometric chucks

Traction Engine

My Ideal lathe

My Old Iron

Engineering Tips

Old Machine Pic's

Panther 100


Update Record


Guest Book

Going back together, it was blue, so is again.

The pile of parts is getting smaller.

Another weekend and a bit further forwards.

Ratchet and Pawl rebuilt, new bushes.

Table back on


Countershaft was okay, new greasers fitted.


Switch block made and in place ready


Belt guard hinge, so much for magnesium, try brass


Guard on new hinge, beginning of catch


Motor plate back on, cable clamps in situ.


New pulley, motor service under way.

Motor in situ

Vice rebuilt, note gun metal jaw and boss


Threads had stripped on left end, built up with weld, turned & threaded

Guard back on.The guard shapes the belt to allow slippage if clutch is in


The finished machine